This guide will show you how to setup 2.4 GHz on your Virgin Media Hub 3.0
Not your router? Click here for more setup guides.
Step 1)
Open a web browser and type "192.168.0.1" into the URL bar then press [Return]/[Enter] to load the webpage.
When the page loads, login using the router's admin credentials and select > Advanced Settings
Step 2 . ) Locate the "Wireless Signal" settings option and enable the "2.4 GHz" option. For maximum compatibility, ensure that the 5 GHz box is disabled.
Note Wireless mode: 802.11b/g/n mixed is the optimal mode.
Step 3)
Once "disable 5Ghz hgas been selected you can select the "Manual" Channel. Please select a number from 1-12 Then press "Apply Changes"
Step 4 [optional])
Once your router has restarted and you're able to access the Internet again you can proceed to setup your WIFIPLUG device. For help setting your WIFIPLUG device up, click here to return to the Support Home Page, choose your device and select the relevant setup guide for your mobile platform.
Note: you can change the port forwarding configurations here
Comments
0 comments
Article is closed for comments.