If you haven't already, you will need to download and install the WIFIPLUG app from the Apple App Store. Please see this guide on how to setup your WIFIPLUG account then return to this guide to complete setup of your WIFIPLUG GLASS+.
Please make sure that you are connected to the network you wish to add your WIFIPLUG to before setup.
Please make sure that mobile data is disabled before attempting setup as it can interfere with and cause problems during the setup process.
Install your WIFIPLUG GLASS+ switch within range of your Wi-Fi router then touch and hold the leftmost gang for 10 seconds to put the switch into Sync Mode.
Please see this guide if you are unsure on how to install your GLASS+ switch.
Open the WIFIPLUG app and login to your WIFIPLUG account. After logging in, press the add (+) button to access the device selection menu. You can also access this menu by going to the Settings page and selecting 'Add new device'.
Select the option labelled 'WIFIPLUG GLASS+'. The app will give you setup preparation steps. Once all steps are complete press 'NEXT STEP'.
You will now be asked to enter a name for your switch and provide your home network credentials so your switch can connect. Your network credentials are not stored within the app nor are they shared with the cloud.
The app will have already filled in the 'Network name' field for you but if you would like to connect your plug to a different network or the app detected the wrong network, please re-enter it in the field.
Once all three fields are complete please connect your mobile device to your plug. The network will be called "WIFIPLUG######". Once connected, return to the WIFIPLUG app and press 'NEXT STEP'.
Please note: both the 'WiFi router name' and 'WiFi router password' fields are case sensitive.
After setup is complete you will be returned to your device list where your WIFIPLUG GLASS+ will be waiting for you.