If you haven't already, you will need to download and install the WIFIPLUG app from the Google Play Store. Please see this guide on how to setup your WIFIPLUG account then return to this guide to complete setup of your WIFIPLUG GLASS.
Please make sure that you are connected to the network you wish to add your WIFIPLUG GLASS switch to before setup.
Please make sure that mobile data is disabled before attempting setup as it can interfere with and cause problems during the setup process.
Install your WIFIPLUG GLASS switch within range of your Wi-Fi router then touch and hold the leftmost gang for 10 seconds to put the switch into Sync Mode.
Please see this guide if you are unsure on how to install your GLASS switch.
Open the WIFIPLUG app and login to your WIFIPLUG account. After logging in, press the add (+) button to access the device selection menu. You can also access this menu by going to the Settings page and selecting 'Add new device'.
Select the option labelled "GLASS+". The app will give you setup preparation steps. Once all steps are complete press 'CONTINUE'.
The app will now connect to your GLASS switch automatically. During this process please do not leave the app or change Wi-Fi networks. If however, the app has not automatically connected to your switch within 30 seconds please manually connect to the WIFIPLUG###### network and return to the WIFIPLUG app.
Once the app is connected to your switch you will be asked to enter a name for your switch and provide your home network credentials so your switch can connect. Your network credentials are not stored within the app nor are they shared with the cloud.
The app will have already filled in the 'Network name' field for you but if you would like to connect your switch to a different network or the app detected the wrong network, please re-enter it in the field.
Once all three fields are complete press 'BEGIN SETUP'.
Please note: both the 'Network name' and 'Password' fields are case sensitive.
After connecting to your switch you may be prompted that the network you are connected to does not have access to the Internet. While this is correct you needn't worry. The switch's network does not have access to the Internet as it's only purpose is to allow your mobile device to communicate with it. If you receive this prompt you can simply ignore it.
After setup is complete you will be returned to your device list where your WIFIPLUG GLASS will be waiting for you.