If you haven't already you will need to download and install the WIFIPLUG app from the Google Play Store and login with your WIFIPLUG account. For help with this process please refer to this guide and then return here to continue setting up your WIFIPLUG GLASS/GLASS+.
Install your GLASS/GLASS+ switch within range of your router and activate pairing mode by touching and holding the leftmost switch for 10 seconds. Pairing mode is activated when the blue light is flashing.
Please refer to this guide if you haven't yet installed your switch.
Open the WIFIPLUG app and login to your WIFIPLUG account. Head to the 'Devices' page (navigation drawer > Devices) and press the add icon in the top right corner.
You may receive a popup message asking for permission to use "Coarse Location". This is required in order for the app to scan for nearby WiFi networks. Press "Allow".
The app will begin scanning for nearby devices that it can setup. Select your device from the list once it appears.
Select your home WiFi network.
Enter the WiFi password for the network chosen in the last step. Optional: check 'Remember password' and the app will save your WiFi password to make setup for future devices easier.
Press 'Begin setup' and the app will begin setting up your device. Please keep this screen visible until the process has finished.
Your WIFIPLUG GLASS/GLASS+ is now ready for use.